Latex Immunoturbidimetry Kits
Glucose Management
Hemoglobin A1C Kit (HbA1c)*
Inflammation
C-reactive protein Kit (CRP)*
Serum amyloid A Kit (SAA)*
C-reactive protein/serum amyloid A Combo Kit (CRP and SAA)*
Renal Functionn
Albumin-to-creatinine Ratio Kit (Albumin, Creatinine, ACR)*
Neutrophil gelatinase associated lipocalin Kit (NGAL)
* CE marked
Product information
Specifications: 5 tests/kit, 10 tests/kit, 20 tests/kit, 50 tests/kit.
Sample type: Serum, EDTA-K2/K3 anticoagulant venous whole blood or plasma.
Storage: The panel is valid for 12 months when stored in a cool and dry place and out of direct sunlight at 2-25°C.
Applicable analyzer: Microfluidic clinical chemistry analyzer JIE-100A, JIE-300A.
Product characteristics
Simple
All in One Disc, Sample in, Result out
Save Time
TAT less than 14 minutes
Save sample
50 µL whole blood ,plasma or finger blood
Accurate results
Precise traceable to IS
Easy
No calibration
Procedure
*Note: Gloves must be worn during the whole process to prevent biological hazards and contamination of the reagent disc.
01
After removing the reagent disc from refrigerator, allow it to sit at room temperature for 10-15 minutes. It can be used once it has returned to the room temperature
02
Scan the QR code of the reagent disc to confirm the test panel
03
Pull out the strip
Note: Once the strip is pulled out, the reagent disc must be laid flat and not turned over. Otherwise, the diluent might flow into other channels
04
Add 50-70 μL sample using a pipette to the sample chamber
05
Tear off the blue protective film
Please wear gloves during the entire process to avoid touching the detection area, which may affect the testing result
06
Test on the analyzer
NNote: When placing the reagent disc, ensure it aligns with the positioning hole. The reagent disc should be placed closely against the tray and kept flat