Time-resolved fluorescence immunoassay Kits
Inflammation Biomarkers
Procalcitonin (PCT)
Interleukin 6 (IL-6)
Cardiovascular Biomarkers
hs-Cardiac Troponin T (hs-cTnT)
Cardiac Troponin T (cTnT)
hs-Cardiac Troponin I (hs-cTnI)
Creatine Kinase MB (CK-MB)
Myoglobin (Myo)
N-terminal pro b-type natriuretic peptide (NT-proBNP)
B-type Natriuretic Peptide (BNP)
D-Dimer (D-Dimer)
All listed tests are CE marked.
Basic product information
Packing specification: 10 cartridges/box.
Sample type: Serum, anticoagulant plasma or whole blood. Note: whole blood can be used directly, attributing to the microfluidic design of plasma separation and quantitation.
Storage conditions and validity: The cartridge is valid for 12 months when stored in a cool and dry place and out of direct sunlight at 2-25°C.
Applicable instruments: Microfluidic immunoassay analyzer JIE-200, JIE-400.
Product characteristics
Simple
Sample in Results out
Save Time
TAT less than 12 minutes
Save sample
50 µL whole blood, no need centrifuge
Precise quantitation
Plasma quantitation through microfluidic design to eliminate the bias introduced by different HCT
High Sensitivity
Comparable to chemiluminescence
Easy
Calibration through scanning, less maintenance
Procedure
*Note: Gloves must be worn during the whole process to prevent biological hazards and contamination of the reagent disc.
01
After removing the reagent disc from refrigerator, allow it to sit at room temperature for 10-15 minutes. It can be used once it has returned to the room temperature
02
Scan the QR code of the reagent disc to confirm the test item
03
Pull out the strip
Note: Once the strip is pulled out, the reagent disc must be laid flat and not turned over. Otherwise, the diluent might flow into other chambers
04
Add 50-70 μL sample using a pipette to the sample chamber
05
Tear off the blue protective film
Please wear gloves during the entire process to avoid touching the detection area, which may affect the testing result
06
Test on the analyzer
Note: When placing the reagent disc, ensure it aligns with the positioning hole. The reagent disc should be placed closely against the tray and kept flat
Contact Us
Whats: 0086-13910425460
Telephone: 400-002-0030
Mailbox: info@jiezlab.com
Address: No.39, Science and Technology Avenue, Yantai High-tech Zone, Shandong Province
